 |
     |
 |
|
|
|
|
|
The Santa Fe
®
Interior Door & BiFold
 |
 |
6'8" Doors
| Width | Length |
# of Panels |
Thickness |
Panel Width |
Outer Stile |
Inner Stile |
Top Rail |
Lock Rail |
Bottom Rail |
Sticking Profile |
Surface |
| 1'0" 1'2" 1'3" 1'4" |
6'8" | Two | 1-3/8"; 1-3/4" | 7" | 2-1/2" 3-1/2" 4" 4-1/2" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 1'6" 1'8" |
6'8" | Two | 1-3/8"; 1-3/4" | 10" |
4" 5" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 1'10" 2'0" |
6'8" | Two | 1-3/8"; 1-3/4" | 14" |
4" 5" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 2'2" 2'4" |
6'8" | Two | 1-3/8"; 1-3/4" | 18" |
4" 5" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 2'6" | 6'8" | Two | 1-3/8"; 1-3/4" | 21" | 4-1/2" | N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 2'8" | 6'8" | Two | 1-3/8"; 1-3/4" | 23" | 4-1/2" | N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 2'10" 3'0" |
6'8" | Two | 1-3/8"; 1-3/4" | 24" |
5" 6" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
7'0" Doors
| Width | Length |
# of Panels |
Thickness |
Panel Width |
Outer Stile |
Inner Stile |
Top Rail |
Lock Rail |
Bottom Rail |
Sticking Profile |
Surface |
| 1'0" 1'2" 1'3" 1'4" |
7'0" | Two | 1-3/8"; 1-3/4" | 7" | 2-1/2" 3-1/2" 4" 4-1/2" |
N/A | 6-3/8" | 7" | 11-7/8" | O | Smooth |
| 1'6" 1'8" |
7'0" | Two | 1-3/8"; 1-3/4" | 10" |
4" 5" |
N/A | 6-3/8" | 7" | 11-7/8" | O | Smooth |
| 1'10" 2'0" |
7'0" | Two | 1-3/8"; 1-3/4" | 14" |
4" 5" |
N/A | 6-3/8" | 7" | 11-7/8" | O | Smooth |
| 2'2" 2'4" |
7'0 | Two | 1-3/8"; 1-3/4" | 18" |
4" 5" |
N/A | 6-3/8" | 7" | 11-7/8" | O | Smooth |
| 2'6" | 7'0 | Two | 1-3/8"; 1-3/4" | 21" | 4-1/2" | N/A | 6-3/8" | 7" | 11-7/8" | O | Smooth |
| 2'8" | 7'0 | Two | 1-3/8"; 1-3/4" | 23" | 4-1/2" | N/A | 6-3/8" | 7" | 11-7/8" | O | Smooth |
| 2'10" 3'0" |
7'0 | Two | 1-3/8"; 1-3/4" | 24" |
5" 6" |
N/A | 6-3/8" | 7" | 11-7/8" | O | Smooth |
8'0" Doors
| Width | Length |
# of Panels |
Thickness |
Panel Width |
Outer Stile |
Inner Stile |
Top Rail |
Lock Rail |
Bottom Rail |
Sticking Profile |
Surface |
| 1'0" 1'2" 1'3" 1'4" |
8'0" | Two | 1-3/8"; 1-3/4" | 7" | 2-1/2" 3-1/2" 4" 4-1/2" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 1'6" 1'8" |
8'0" | Two | 1-3/8"; 1-3/4" | 10" |
4" 5" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 1'10" 2'0" |
8'0" | Two | 1-3/8"; 1-3/4" | 14" |
4" 5" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 2'2" 2'4" |
8'0" | Two | 1-3/8"; 1-3/4" | 18" |
4" 5" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 2'6" | 8'0" | Two | 1-3/8"; 1-3/4" | 21" | 4-1/2" | N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 2'8" | 8'0" | Two | 1-3/8"; 1-3/4" | 23" | 4-1/2" | N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
| 2'10" 3'0" |
8'0" | Two | 1-3/8"; 1-3/4" | 24" |
5" 6" |
N/A | 4-3/8" | 7" | 9-7/8" | O | Smooth |
Sticking Profile: B=Beaded, MCB=Modified
Cove and Bead, O=Ovolo
*Assuming standard bore machining (2-1/8" diameter bore), outer stile
measurements listed above must be no less than 3-7/16" in order to accommodate a
2-3/8" back- set on the lock hole. For 2-3/4" backsets, outer stile measurements
must be no less than 3-13/16". If lock bore machining is less than the outer
stile measurements listed above, all lock bore drilling must be done within the
lock rail for best appearance. Outer stile dimension may vary 1/4" from the
measurements listed above.
home |
products > Interior
Molded Doors: The Santa Fe |
catalog | new products |
specials |
contact us |
shipping info |
photo gallery | q & a
 |
||
|
315 North
Avenue |
© Copyright Grinnell Door Co., Inc. 2004 All rights reserved. |
Phone: 586.463.8667 Fax: 586.463.4098 |
|
|
||